Mechanik & Einfache Maschinen · GCSE Physics Topic 5 (Simple Machines)
Schiefe Ebene & Gewinde-Simulator
Schiefe Ebene & Schraubengewinde: Goldene Regel der Mechanik und Wirkungsgrad
- Clientseitig
- Keine Anmeldung
- Echtzeit-Herleitung
- Projektormodus
- A4-Arbeitsblatt
3D-Simulationsfenster● 60 FPS
Experimentelle Steuerungsparameter
m
m
N
Echtzeit-Herleitung & Kennzahlen
Ideale Kraft F0
--
Reale Kraft F
--
Kraftübersetzung
--
Mechanischer Wirkungsgrad
--
Echtzeit-Formelherleitung
Grundformel:
--Einsetzungsschritte:
--Physikalischer Zustand: --
Typische Beispielaufgaben & Prüfungsfallen
Worked Problem
Aufgabe: A winding mountain road is 3km long with 300m height gain. A 50000N truck faces 5*10^6 J friction work. Find useful work, total work and efficiency.
Schrittweise Herleitung:
- Useful work W_u = 50000*300 = 1.5*10^7 J. Total work W_t = 1.5*10^7 + 5*10^6 = 2.0*10^7 J. Efficiency η = 75%.
Worked Problem
Aufgabe: Slope is 1m high, 4m long. A 300N pull moves an 800N load uniformly to the top. Find friction and efficiency.
Schrittweise Herleitung:
- W_total = 300*4 = 1200J. W_useful = 800*1 = 800J. Extra work W_extra = 400J. Friction f = 400/4 = 100N. Efficiency η = 66.7%.
Arbeitsblatt für den Unterricht & Hausaufgaben
Q1. Variant 1: Does an inclined plane have higher or lower efficiency when steeper?
Answer Key: Higher efficiency! Steeper slopes decrease normal force N=G*cosθ and friction, reducing wasted extra work (though requiring greater pulling effort).
Q2. Variant 2: Why do mountain roads wind in switchbacks instead of ascending straight up?
Answer Key: Winding curves increase road length L, lowering required uphill engine tractive effort by the inclined plane principle.
Q3. Variant 3: What are the trade-offs between finer (denser) vs coarser screw thread pitch?
Answer Key: Finer pitch creates a gentler slope, making tightening much easier and self-locking firmer, but requires more turns to drive in.
Häufige Fragen & typische Missverständnisse
Can an inclined plane save work?
Never! The principle of work dictates no machine saves work. Saving force always requires traversing a proportionally greater distance.
How does a screw convert rotation to linear force with mechanical advantage?
A screw coils an inclined plane around a shaft. A modest torque applied at the perimeter translates along the thread pitch into immense axial clamping force.
Can inclined plane efficiency ever reach 100%?
Not in reality. Friction always causes unavoidable wasted heat work, bounding mechanical efficiency below 100%.
Is a wedge (axe blade or knife) an application of an inclined plane?
Yes! An axe is a double inclined plane placed back-to-back. Forward driving force decomposes into large lateral wedge splitting forces.